When your car’s alternator isn’t working, it can be challenging to use your vehicle. Luckily, knowing how to troubleshoot common problems will get you back on the road in no time. With some guidance from a respected automotive alternator expert at Eubanks Auto Electric of De Kalb, TX, you’ll quickly become a savvy steward of your vehicle. Here are three suggestions from these experts on how to handle alternator issues. 

An Equipment Expert’s Guide to Working With Alternators

Use a Voltmeter

To get a sense of how your alternator is performing, measure its power with a voltmeter. First, leave the ignition on while the engine is off. If your voltmeter reads below 12 volts, you may be looking at a wiring disturbance, or the battery may be low. Turn the ignition with the engine on and check again. If your voltmeter shows greater than 14.4 volts, your alternator is overcharging, and you should speak to an expert. 

Assess the Drive Belt

The drive belt facilitates movement within the alternator. Many times, the tension can become askew, preventing the belt from doing its job. In some cases, the drive belt is strapped too tightly, putting undue pressure on the alternator. In other cases, it may be too loose and fail to sync with the pulley 

If none of these solutions do the trick, consult a professional at Eubanks Auto Electric. Offering assistance with  alternators off vehicles, trucks, tractors, forklifts, and any other kind of equipment. They will exchage or repair your unit as quickly as possible. To speak with one of their friendly representatives, call (903) 667-2081. Learn more about the company by visiting their website.